Incoloy 800 Socket Weld Fittings Manufacturer

Inconel 625 Socket Weld Fittings
Inconel 625 Socket Weld Fittings Manufacturer
September 27, 2021
Inconel 718 Socket Weld Fittings
Inconel 718 Socket Weld Fittings Manufacturer
September 28, 2021
Incoloy 800 Socket Weld Fittings

Incoloy 800 Socket Weld Fittings

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of a wide quality range of Incoloy 800 Socket Weld Fittings, which has many different industrial applications, some of which include: Industrial furnaces, Hydrocarbon cracking, Heat exchangers and Ethylene furnace quench boilers. For hot working in Incoloy 800 Forged Socket Weld Elbow Fittings, temperatures should be between 1000 Degree C and 1230 Degree C although light work may be done at temperatures as low as 850 Degree C. To avoid possible stress relaxation grain boundary cracking of Incoloy 800H Forged Socket Weld Tee Fittings in applications above 1000 Degree F, the welded fabrication may be heated 1650 Degree F for about one hour per inch of thickness or 30 minutes minimum then air cooled.

This modification of Incoloy 800HT Forged Socket Weld Cap Fittings was to control carbon and grain size to optimize stress rupture properties. Alloy 800H Forged Socket Weld Coupling Fittings is a solution heat treated (2100 Degree F / 1150 Degree C) and a controlled – carbon version of Alloy 800 Forged Socket Weld Cross Fittings with improved elevated temperature properties.

Incoloy 800 Socket Weld Fittings | Incoloy 800 Socket Weld Fittings | Incoloy 800 Socket Weld Fittings | Incoloy 800 Socket Weld Fittings | Incoloy 800 Socket Weld Fittings

Alloy 800HT Forged Socket Weld Lateral Tee Fittings is meant to fill the need for a heat – and corrosion – resistant alloy with relatively low nickel content since nickel was, at the time, designated a “strategic” metal. Alloy 800 Forged Socket Weld Union Fittings has added Carbon and annealing treatment allows for higher creep and rupture properties above 1100 Degree F (600 Degree C).

Incoloy 800/800H/800HT Socket weld Fittings Specifications
Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

Incoloy 800/800H/800HT Forged Socket weld Fittings Chemical Composition

Grade C Mn Si Al S Cr Cu Ni Fe
Incoloy 800 0.10 max 1.50 max 1 max 0.15 – 0.60 0.015 max 19.0-23.0 0.75 max 30.0-35.0 39.5 min
Incoloy 800H 0.05 – 0.10 1.50 max 1 max 0.15 – 0.60 0.015 max 19.0-23.0 0.75 max 30.0-35.0 39.5 min
Incoloy 800HT 0.06 – 0.10 1.50 max 1 max 0.15 – 0.60 0.015 max 19.0-23.0 0.75 max 30.0-35.0 39.5 min

Alloy 800/800H/800HT Socket weld Fitting Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.94 g/cm3 1385 °C (2525 °F) Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa – 205 30 %

Equivalent Grades for 800/800H/800HT Incoloy Forged Socket weld Fittings
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Incoloy 800 1.4876 N08800 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20
Incoloy 800H 1.4958 / 1.4876 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X5NiCrAlTi31-20
Incoloy 800HT 1.4859 / 1.4876 N08811 NCF 800HT NA 15(HT) ЭИ670 X8NiCrAlTi32-21

Incoloy 800/800H/800HT Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy 800/800H/800HT Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Get Quote