Hastelloy C276 Tube to Female Pipes Manufacturer

Hastelloy C22 Tube to Female Pipes
Hastelloy C22 Tube to Female Pipes Manufacturer
November 2, 2021
Hastelloy B2 Tube to Female Pipes Manufacturer
November 9, 2021
Hastelloy C276 Tube to Female Pipes

Hastelloy C276 Tube to Female Pipes

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Hastelloy C276 Tube to Female Pipes, which is particularly resistant to pitting and crevice corrosion. Hastelloy C276 Tube Fittings has been used extensively to protect against the most corrosive FGD systems and the most sophisticated pharmaceutical reaction vessels. Hastelloy C276 Compression Fittings has been very successful as phosphoric acid heat exchanger tubing and for other process components in the fertilizer industry. Hastelloy C276 Female Connector Fittings is a new Ni – Cr – Mo alloy with superior resistance to hydrochloric and sulphuric acids, without the drawbacks of the Ni – Mo and Zr materials.

Hastelloy C276 Tube to Female Pipes

Hastelloy C276 Tube to Female Pipes

The resistance of Hastelloy C276 Ferrule Fittings to these key chemicals is much greater than that of the popular Ni – Cr – Mo alloys. Hastelloy C276 Double Ferrule Fittings has the outstanding resistance to pitting and crevice attack in chloride salt solutions. Alloy C276 Female Connector Tube Fittings even withstands high levels of oxidizing impurities that the Ni – Mo alloys cannot cope with. Alloy C276 Compression Tube Fittings has same excellent resistance to hydrochloric acid and other strongly reducing chemicals as B-2 alloy.

Alloy C276 Ferrule Tube Fittings has significantly better thermal stability, fabricability and stress corrosion cracking resistance than B2 alloy. High – temperature stability of Alloy C276 Double Ferrule Tube Fittings in the 1200 Degree F – 1900 Degree F (650 Degree C – 1040 Degree C) range as evidenced by good ductility and corrosion resistance.

Hastelloy C276 Tube to Female Pipes Specifications
Specifications : ASTM B366 ASME SB 366
Size : OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating
: 3000 – C2760 PSI
Applicable Temperature
: 150-400 C
: Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
C276 Hastelloy Alloy Tube to Female Pipes Fitting Chemical Composition
Hastelloy C276 Ni C Mo Mn Si Fe P S Co Cr
Balance 0.01 max 15 – 17 1.0 max 0.08 max 4 – 7 0.04 max 0.03 max 2.5 max 14.5 – 16.5
Hastelloy Alloy C276 Tube to Female Pipes Fitting Mechanical Properties
Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.89 g/cm3 1370 °C (2500 °F) Psi – 52,000 , MPa – 355 Psi – 1,15,000 , MPa – 790 40 %
Equivalent Grades for C276 Hastelloy Tube to Female Pipes Fitting
Hastelloy C276 N10276 2.4819 NiMo16Cr15W NW 0276 ЭП760 ХН65МВУ
Hastelloy Alloy C276 Tube to Female Pipes Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Hastelloy C276 Tube to Female Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)


Get Quote