Incoloy 925 Tube to Female Pipes Manufacturer

Incoloy 825 Tube to Female Pipes
Incoloy 825 Tube to Female Pipes Manufacturer
November 1, 2021
Incoloy 330 Tube to Female Pipes
Incoloy 330 Tube to Female Pipes Manufacturer
November 2, 2021
Incoloy 925 Tube to Female Pipes

Incoloy 925 Tube to Female Pipes

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Incoloy 925 Tube to Female Pipes, where most any commercial coolant may be used in the machining operations. Incoloy 925 Tube Fittings is ideally suited to down – hole and surface gas well components such as valves, hangers, nipples, tool joints, fasteners and packers. Soft die materials such as zinc alloys and bronze in Incoloy 925 Compression Fittings are used to produce good finishing and avoid galling problems. The precipitation – hardening (age – hardening) heat treatment in Incoloy 925 Female Connector Fittings causes precipitation of gamma prime phase, Ni3 (Al, Ti), where the phase greatly increases both the hardness and strength of the alloy.

Incoloy 925 Tube to Female Pipes

Incoloy 925 Tube to Female Pipes

The metallurgical composition of Incoloy 925 Ferrule Fittings makes them outstandingly resistant to crevice corrosion and pitting. The resistance of Incoloy 925 Double Ferrule Fittings is developed by the precipitation of the gamma phase through solubilization and aging heat treatment, so as to maintain ductility and toughness at high levels. Incoloy 925 Compression Tube Fittings combines the high strength of a precipitation – harden able alloy with the excellent corrosion resistance of alloy 825.

These Alloy 925 Tube Fittings is an age harden able nickel – iron – chromium alloy designed to provide a combination of high strength and good corrosion resistance. Alloy 925 Compression Fittings is designed primarily for applications in the production of gas. Alloy 925 Female Connector Fittings is particularly resistant to sulfide – induced stress cracking and stress – corrosion cracking.

Incoloy 925 Tube to Female Pipes Specifications
Specifications : ASTM B366 ASME SB 366
Size : OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating
: 3000 – 9250 PSI
Applicable Temperature
: 150-400 C
: Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
925 Incoloy Alloy Tube to Female Pipes Fitting Chemical Composition
Grade C Mn Si Fe S Cr Cu Ni
925 min. 22.0 19.5 1.5 42.0
max. 22.5 3.0 46.0
Incoloy Alloy 925 Tube to Female Pipes Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Incoloy 925 Tube to Female Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Get Quote