Inconel 601 Tube to Male Fittings

Inconel 601 Tube to Male Fittings Manufacturer

Sachiya Steel International is one of the leading manufacturer and exporter of Inconel 601 Tube to Male Fittings, which can operate from cryogenic temperatures up to 645 Degree F (340 Degree C). The nickel base of Inconel 601 Tube Fittings, in conjunction with substantial chromium content, provides resistance to many corrosive media and high – temperature environments. The field of use for Inconel 601 Compression Fittings extends to industrial furnace retorts and muffles, jigs, fixtures, baskets, wire annealing tubes which have all been produced in this excellent high temperature material.

Inconel 601 Compression Tube Fittings has great aqueous corrosion resistance, high mechanical strength and is easily produced, welded and machined. Inconel 601 Male Connector Fittings has good resistance to nitriding in dissociated ammonia, and is only outperformed by Inconel 601 in this application. Solution treating is the treatment normally applied to Inconel 601 Ferrule Fittings involving exposure to temperatures of 1000 Degree F and higher, annealing to parts exposed to temperatures below 1000 Degree F. Inconel 601 Double Ferrule Fittings is often used for tube supports and ash trays in the power generation industry.

In petrochemical processing, Alloy 601 Tube Fittings is used for catalyst regenerators and air preheaters in the manufacture of high – density polyethylene. Alloy 601 Compression Fittings is also used in tubes, retorts, chain curtains, flame shields and conveyor belts for industrial furnaces. Alloy 601 Male Connector Fittings is formed using all conventional techniques.

Inconel 601 Tube to Male Fittings Specifications
Specifications : ASTM B366 ASME SB366
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Inconel, 300/1000/3000PSI for Brass

 

Inconel Alloy 601 Tube To Male Fittings Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr
Inconel 601 0.10 max 1.00 max 0.50 max 0.015max 1.00 max Balance 58.0 – 63.0 21.0 – 25.0

Inconel 601 Tube To Male Fittings Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 601 8.1 g/cm3 1411 °C (2571 °F) Psi – 80,000 , MPa – 550 Psi – 30,000 , MPa – 205 30 %

Equivalent Grades for 601 Inconel Ferrule Fitting Tube To Male Fittings
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 601 2.4851 N06601 NCF 601 NA 49 XH60BT NC23FeA NiCr23Fe

 

Alloy 601 Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Inconel 601 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

 

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Leave a Comment

Your email address will not be published. Required fields are marked *